XT20 + 18mm f2 FUJI

XT20 + 18mm f2 FUJI

The main features of FUJI XT20 :

• CMOS type sensor APS-C X-Trans III 24.3MP
• X-Pro Image Processor
• 2.36m-Dot electronic viewfinder
• 3.0" LCD touch screen
• Video recording at UHD 4K 30p
• Built-in Wi-Fi
• Extended ISO 51200,
• Burst shooting up to 14 fps
• 91 AF points with custom settings in AF-C mode
• Film simulation for photos and videos

Of course you do not have to worry about the handling, it helps you a lot the free training course of 10 Hours in our Academy

Based on the experience of the X-T10 FUJI, the X-T20 is now bornFUJI with the most advanced technology and already demonstrated in its older sisters XPRO2 and XT2 and with which it shares the same sensor and processor, having grown a lot in video quality reaching a quality in 4k

The AF system, completely renovated, has improved and much over XT10, uses 91 total points, which can be divided into 325 areas of a high degree of focusing accuracy in a variety of lighting conditions.

Approximately 50% of the Horizontal side and 75% of the superior to the bottom are also covered, making these phase detection points provide fast AF performance to adapt to working with moving subjects.

When working with autofocus, you can choose either single-shot AF-S mode or continuous AF-C mode, and each can be used in conjunction with a single AF point, AF Zone, or tracking width/AF setting. In addition, custom AF-C settings allow you to choose from five AF-C resets depending on how the subject is in motion, and the AF algorithm has been optimized for better subject tracking and overall accuracy.

The exposure compensation dial now has the C position for exposure compensation up to ± 5 points, while the LCD monitor uses a touchscreen panel for intuitive operation at almost any angle. The X-T20 is also equipped with an Auto mode selector lever to select the SR Auto auto mode, where the camera selects the optimal settings for a given scene.

Being attached to our Club, always brings added advantages ...

The X-mount has a distance to the edge of just 17.7mm, as it has been specifically designed to take full advantage of the body's mirrorless design. This means that the rear elements of the lens are as close to the sensor as possible. The wide aperture allows the lens to be mounted deeper into the body (approximately up to 7.5 mm from the mount surface), reducing the rear focus distance of each lens to the minimum possible and allowing for high resolution up to the edges of the image.

The 18mm XF F2 lens provides precise depth of field control and an excellent "bokeh" effect with the background out of focus thanks to the design of the molded diaphragm aperture blades. The sheets are curved to create a circular image in all aperture settings, while the edges of each sheet are meticulously rounded rather than simply cut, allowing for a sharper image.

In addition, the feeling of solidity provided by the high-quality metal drum and the precise exposure adjustment in 1/3-step increments using the aperture ring feed the desire to capture more photos with each shot.