Aquatech Front Lens Port P-135 for zoom lens + P-50Ex Extender

Front Aquatech P135 | Lens port P 135 Aquatech

The lens ports or lens ports of aquatech have a threaded system that is interchangeable with all aquatic housings of aquatech. No tools are required to connect or remove the port. The element is replaceable if it is damaged, and replacement can only be performed by a service center aquatech.

The P-135 aquatech lens port is designed for the SONY 24-70mm f/4 ZA and 24-70mm f/2.8 GM zoom lens (will require the right lens gears). If you use 24-70mm f/2.8 GM, this port will also require the P-30 EX extension ring.

This port can also be composed of a 50mm extension ring (P-50EX) and a front port section to suit the zoom range of the lens. These port parts can also be used as an extension ring to match the dome ports, and the front section can be used with other short-length primary lenses, making it a very versatile combination. Main features: Optically correct acrylic element Mechanically sealed, no adhesives are used. Replaceable element.

SPECS

• Dimensions (DxL): 190 mm x 118 mm
• Weight: 1.80 lb (820 g)
• Material: acrylic element, aluminum base