TT685 Compact Flash Godox for FUJI

Flash Godox TT685 for FUJI

With full support for Fujifilm TTL, including high-speed synchronization, and an integrated 2.4GHz radio system, the Godox TT685F Thinklite TTL Flash will make it easy to create simple and elaborate lighting setups. When mounted on the camera, it is an effective lighting tool with a powerful guide number of 197' at ISO 100 and 200mm, a zoom range of 20-200mm and the ability to tilt from -7 to 90° and rotate 360°. As a TTL-compatible unit, the TT685F can also function as a full wireless master unit or slave with TTL functionality.

Operation is intuitive with a rear LCD panel showing the settings. In addition, the flash is equipped with a wireless control port to connect an optional remote control set and has a 3.5mm sync port for basic wired connectivity. It is powered by four AA batteries, which help provide a recycling time of 0.1 to 2.6 seconds.

An integrated 2.4GHz X radio system is built into the TT685F for wireless activation. It can be set up as master or slave, this flash will help you create a versatile lighting setup with a range of 328' and support for 32 channels and three groups. It can also work with an optional X-series transmitter to create more elaborate configurations.

• Being compatible with Fujifilm's TTL system, users will enjoy numerous automated flash settings and the ability to use features such as high-speed synchronization.
• With a guide number of 197' to ISO 100 and 200mm, the TT685F will easily illuminate most subjects. It also features a zoom head with a range of 20-200mm and a 14mm wide-angle panel for using a variety of different lenses.
• Manual power control from 1/1 to 1/128 in 1/3 EV steps.
• The flash head can be tilted from -7 to 90° and rotated a total of 360° to control the bounce and where the light hits the scene.
• Master/slave optical transmission is available to work with other standard flashes.
• With an optional FT series remote control set, users can connect to the wireless control port to gain wireless control over flash power settings.
• A 3.5mm sync port is available to set up a wired connection to a camera or shutter release.
• This flash is powered by four alkaline AA or NiMH batteries that help produce about 230 flashes at full power and recycling times of 0.1 to 2.6 seconds.
• USB connection to install future firmware updates.