FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
search
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40
  • FLM Kit CP26 L4S + CB32F + QRB40 + QRP40

FLM Kit CP26 L4S + CB32F + QRB40 + QRP40

This kit of FLM pen plus tripod is composed of: The tripodFLM CP26 L4S,with a endurance of up to 10 KG, weighing only 1.2 Kg + the ball typeFLM CB32F, with friction control and the qrB40FLM base of 40mm, with its corresponding Plate

This product is not available, but please contact us and we can offer you other options.

Contact

The CP26-L4S Carbon Fiber Tripod from FLM is a lightweight and compact stand for a maximum of £22 a weight of just 2.6 pounds, it can support almost 10 times its weight. It has a maximum height of 67.7" and a folded height of 20.0".

The 4-section legs are made of 8-layer carbon tubes which gives it stability and without unnecessary weight. Twist locks on each leg allow the sections to be opened and closed with one hand. Twist locks also prevent dirt and moisture from entering the area between the sections. The legs are independently adjustable for use on uneven terrain and locking in position by means of a push-lever lock. With the center column removed and the legs at their widest angle, the tripod sits only 4.7" tall for low angle photography.

Each leg is equipped with rubber tips for slippery surfaces and retractable skewer for outdoor engraving on surfaces such as sand, grass, or ice
A bubble level is integrated into the bottom of the central column to help position your tripod when on uneven ground
A
retractable hook is integrated into the central counterweight column to add stability
The
CB-32 MFLM Pen has a maximum load capacity of £44.1 Two ball head control locking knobs; one knob controls the 360° pan and the other controls the friction and movement of the ball. It can be mounted on a tripod, monopod or any other stand with a "3/8 -16 male thread". A notch in the head allows the camera to tilt 90° to shoot in portrait orientation.

The QRP-40 Quick Release Clamp and FLM Plate is a quick release system that includes the 40-II QRB clamp and a quick release plate. It allows you to connect or disconnect the camera from the tripod, monopod or other stand quickly. The clamp has a locking lever that secures its plate and the camera in place. The dovetail quick release plate is made for cameras with a "-20" 1/4 tripod thread. It has a cork-coated surface that protects the bottom of its camera body and prevents the chamber from twisting.

The quick release adapter has a slot for the HSA-45 or HSA-80 flash shoe adapters, allowing you to add a bubble level or other cold-shoe mounted accessory.
CP26 L4SCB32FQRB40QRP40
Cookie consent