Phottix Atlas II Kit of 2 units

Characteristics

• Wide scope.
• High synchronization speed.
• Transmitter and receiver modes.
• 4 channels.
• Shoot hot shoe or studio flashes.
• Hot shoe and two synchro ports for connecting flash drives.
• Wired or wireless camera shooting function (optional cable required).
• Digital IC
• Uses AA batteries or DC current input

• Frequency: 2.4 GHz.
• Range: 350m
• Connection channels: 4
• Batteries: 2 x AA
• Maximum sync speed: 1/250 sec (with the right flash/camera combination)
• Flash connection ports: Zapata, 3.5mm sync ports
• Tripod hitch: 1/4
• Operating temperature: -15—65 C

1. For the PHOTTIX Odin: adjust the TCU (transmitter unit in the camera) on channel 1, 2, 3 or 4 and in any group to shoot the PHOTTIX Atlas II in receiver mode on channels 1, 2, 3 or 4. Exposure is controlled in manual mode, not TTL. The rest of the functions of the Odin TCU do not work with the Atlas II.
2. For the PHOTTIX Strato II: set the transmitter on channel 1, 2, 3 or 4 and on any group to fire the atlas II PHOTTIX in receiver mode on channels 1, 2, 3 or 4.
3. Strato' PHOTTIX transmitters will fire the Atlas II in receiver mode on channels 1 to 4.
4. The Atlas II, in transmitter mode, can fire Strato receivers.
5. Atlas II in transmitter mode cannot fire Strato II Multi or Odin receivers.

For the use of the Atlas II as remote camera triggers (either wired or wirelessly, the corresponding connection cable to the camera is required. These are the standard cables for connecting remote controls PHOTTIX called N6, C6, etc. with the codes between PX17310 and PX17375. See remote control information PHOTTIX for more compatibility information.