• -10%
Atlas II Phottix
search
  • Atlas II Phottix
  • Atlas II Phottix
  • Atlas II Phottix

Atlas II Phottix

€100.00
€90.00 Save 10%
VAT included

The atlas IIPHOTTIX will allow you to shoot both the camra as well as the flashes whether these compact or studio, its simplicity and reliability will allow you to have in this accessory a good travel companion

Quantity

Newsletter

Suscríbete a la Newsletter

Y consigue ofertas exclusivas, solo aquí publicadas

Characteristics

  • Wide scope.
  • High synchronization speed.
  • Transmitter and receiver modes.
  • 4 channels.
  • Shoot hot shoe or studio flashes.
  • Hot shoe and two synchro ports for connecting flash drives.
  • Wired or wireless camera shooting function (optional cable required).
  • Digital IC
  • Uses AA batteries or DC current input
Important note: The Atlas II system is not compatible with the original Atlas PHOTTIX .
Technical specifications
  • Frequency: 2.4 GHz.
  • Range: 350m
  • Connection channels: 4
  • Batteries: 2 x AA
  • Maximum sync speed: 1/250 sec (with the right flash/camera combination)
  • Flash connection ports: Zapata, 3.5mm sync ports
  • Tripod hitch: 1/4
  • Operating temperature: -15—65 C
Notes on the compatibility of Atlas IIPHOTTIX with the PHOTTIX Odin, Strato II Multi 5-in-1 and PHOTTIX Strato 4-in-1 systems.
  1. For the PHOTTIX Odin: adjust the TCU (transmitter unit in the camera) on channel 1, 2, 3 or 4 and in any group to shoot the PHOTTIX Atlas II in receiver mode on channels 1, 2, 3 or 4. Exposure is controlled in manual mode, not TTL. The rest of the functions of the Odin TCU do not work with the Atlas II.
  2. For the PHOTTIX Strato II: set the transmitter on channel 1, 2, 3 or 4 and on any group to fire the atlas II PHOTTIX in receiver mode on channels 1, 2, 3 or 4.
  3. Strato' PHOTTIX transmitters will fire the Atlas II in receiver mode on channels 1 to 4.
  4. The Atlas II, in transmitter mode, can fire Strato receivers.
  5. Atlas II in transmitter mode cannot fire Strato II Multi or Odin receivers.

Note on using Atlases as remote camera triggers:

For the use of the Atlas II as remote camera triggers (either wired or wirelessly, the corresponding connection cable to the camera is required. These are the standard cables for connecting remote controls PHOTTIX called N6, C6, etc. with the codes between PX17310 and PX17375. See remote control information PHOTTIX for more compatibility information.

89102

Specific References

EAN13
5901054891024
Cookie consent