Sony A7 III + TAMRON 28-200mm f2.8-5.6

Sony A7III + 28-200mm TAMRON | SONY A7III + 28-200mm f2.8-5.6 TAMRON

Learn more about SONY α7 III

The unrivalled innovation of SONY within the image sensor space is at the forefront of the new α7 III, as it features a new 24.2MPi Exmor R CMOS image sensor backlit with increased sensitivity, exceptional resolution and an impressive range of 15 stopsii from dynamic range to low sensitivities By combining this sensor with a variety of impressive features including extreme AF coverage of 93%, Fast shooting at up to 10 fpsiii with mechanical shutter or silent shootingiv, various 4Kvi video capabilities and more, SONY has created a new tool that offers all kinds of creators, from enthusiasts to professionals, the ability to capture content in new and different ways than they had before.

Spectacular full-screen image quality

The newly developed 24.2MPi Exmor R CMOS image sensor is combined with a front-end LSI that effectively doubles the reading speed of the image sensor, as well as an updated BIONZ X ™ processing engine that increases the processing speed by about 1.8 times compared to the α7 II. These powerful components work together to allow the camera to shoot at higher speeds and also allows for its impressive ISO range of 100 - 51200 (expandable to ISO 50 - 204800 for still images) and an overall improvement of 1.5 stops [ix] in image quality. The camera also features a wide dynamic range of 15 mouths with low-sensitivity settings, ensuring outstanding overall performance in all environments and in all shooting conditions, with significant advances in accurate reproductions of skin tones and vibrant colors from nature.

This new full-frame model can also generate 14-bit RAW format [x] even in silent and continuous shooting modes, and is equipped with a 5-axis optical image stabilization system that results in a 5.0-stop shutter speed advantage.

Significant advances in AF speed and performance

The innovative new α7 III full-frame mirrorless camera features a level of AF performance that has been greatly improved over the α7 II, including the addition of 4D FOCUS ™ capabilities. The new camera has 425 contrast AF points that work with a 693-point focal plane phase detection AF system inherited from the acclaimed α9 model. This innovative autofocus (AF) system covers approximately 93% of the frame, ensuring reliable focus and tracking for even the most difficult-to-capture subjects.

AF response and tracking has also been greatly improved in the new camera, with almost 2xix of focusing speed in low light conditions and 2xii tracking speed compared to the previous model as a result of the faster reading of the image sensor. This makes it possible to capture complex and unpredictable movements with greater precision and precision.

The acclaimed Eye AF feature is also available on the new camera, even in AF-C mode, which is extremely useful for situations where the subject is spinning, looking down, or clogged. It also works when the α7 III is used with SONY 's A-mount lenses with an optional LA-EA3 [xi] adapter. Additional improvements in focusing flexibility include the addition of a multi-selector or 'joystick' to move focus points quickly, the addition of touch focus capability, the availability of AF in Focus Magnifier mode, the 'AF On' button and much more.

Speed to capture every decisive moment

The new α7 III is equipped with an updated image processing system that allows you to take full-resolution images up to 10 fpsiii with continuous and accurate AF/AE tracking for up to 177 standard JPEG images, 89 compressed RAW images or 40 uncompressed RAW images [xii]. This high-speed mode is available with a mechanical shutter or with a completely silent shot, which increases the immense flexibility of the camera. The camera can also shoot continuously at up to 8 fpsiii in live view mode with minimal delay in the viewfinder or LCD screen.

For convenience, while recording large groups of images in burst onto the memory card, many of the camera's key functions are operable, including access to the 'Fn' (Function) and 'Menu' buttons, image playback and other menus and parameters including image sorting and other functions that make it easier to classify images on site.

In addition, if fluorescent or artificial lighting is present in a shooting environment, users can activate the Anti-Flicker function [xiii] to allow α7 III to automatically detect the illumination frequency and shutter time to minimize its effect on the captured images. This minimizes any exposure or color anomalies that can sometimes occur on the superior and bottom of images taken at high shutter speeds.

High-quality 4Kvi video

The new α7 III is also an exceptional video camera, offering 4Kvi (3840x2160 pixels) video recording across the entire width of the full-frame image sensor. In video mode, the camera uses full pixel reading without pixel clustering to collect approximately 2.4x [xiv] the amount of data required for 4K movies, and then oversamples it to produce high-quality 4K footage with exceptional detail and depth.

An HLG (Hybrid Log-Gamma) image profile [xv] is also available on the α7 III, which supports an Instant HDR workflow, allowing HDR (HLG) compatible TVs to play real and real 4K HDR images. In addition, both S-Log2 and S-Log3 are available to increase color rating flexibility, as well as Zebra functionality, Gamma Screen Assist, and proxy recording. The camera can also record Full HD at 120fps at a speed of up to 100 Mbpsvi, allowing images to be reviewed and finally edited into 4x or 5x slow-motion video files in Full HD resolution with AF tracking.

Design, design and customization update

Sony's newest full-frame camera is equipped with a variety of enhanced capabilities that were first implemented in the α9 and then in the α7R III. These include dual media slots, with support in a UHS-II type SD memory card slot. Users have a variety of options to store their content on each of the cards, including separate JPEG/RAW recording, separate still image/movie recording, relay recording, and more. Battery life has also been extended: with a CIPA measurement of up to 710 shots per chargeviii, it offers the world's longest battery life of any Mirrorless camera, as the new camera uses the Z-Series NP-FZ100 battery of SONY which offers approximately 2.2 times the capacity of the NP-FW50 series battery used in the α7 II.

The new camera features "My Menu" functionality that allows you to record up to 30 menu items to retrieve them instantly when needed. Users can also apply star ratings to their still images through camera controls to facilitate image playback and review, and edit the first three characters of all static image files. In addition, there are a total of 81 functions that can be assigned to 11 custom buttons, and the camera is dust and moisture resistant [xvi].

The α7 III features a high-resolution, high-contrast, fast-booting TruED OLGA OLED, with approximately 2.3 million dots for extremely accurate and true-to-reality ™ detail reproduction. The "Standard" or "High" screen quality settings are also available for both the viewfinder and the monitor. It's also capable of seamlessly transferring files to a smartphone, tablet, computer, or FTP server over Wi-Fi®, and also offers a USB Type-C ™ SuperSpeed USB (USB 3.1 Gen 1) terminal for greater flexibility in power supply and faster image transfer speed during tethered shooting.

LENS COMPATIBILITY

SONY E-mount lenses

SENSOR TYPE

35 mm (35.9 x 24 mm) full-frame, Exmor R® CMOS sensor

NUMBER OF PIXELS (EFFECTIVE)

42.4 MP

ISO SENSITIVITY

Photography: ISO 100-25,600 (expandable to ISO 50–102,400 for photo capture), AUTO (ISO 100 to 6,400, lower limit and selectable superior limit), Video: ISO 100-25,600 equivalence, AUTO equivalence (ISO 100-6,400, lower limit and selectable superior )

VIEWER TYPE

1.3 cm OLED XGA (color) electronic viewfinder (type 0.5)

DUR. BATTERY ( IM. FIXED)

290 shots approx. (viewfinder)/340 shots approx. (LCD screen) (CIPA standard)

SCREEN TYPE

7.5 cm TFT unit (type 3.0)

• Characteristics objective TAMRON 28-200 mm f2.8-5.6

Offering the unique combination of an all-in-one zoom range and fast design, TAMRON 's 28-200mm f/2.8-5.6 Di III RXD is a large to super tele zoom that is distinguished by its bright f/2.8 maximum aperture at the wide end of the zoom, along with its sleek, portable design. A number of specialized elements are used to maintain high sharpness and clarity throughout the zoom range. The optical design benefits from an RXD stepper motor, which enables fast, near-silent autofocus performance to suit still images and video, along with full-time manual focus override and a minimum focusing distance of 7.5." It also has a moisture-resistant construction along with a fluorine-coated front element to protect against fingerprints and stains.

• The all-in-one zoom is designed for mirrorless cameras SONY full-frame E-mount, however, it can also be used with APS-C models where it will provide an equivalent focal length range of 42-300mm.
• The maximum bright aperture range f/2.8-5.6 suits working in available lighting conditions, especially when working at the wide-angle end of the wide zoom range.
• A number of specialized elements control a variety of aberrations to achieve high sharpness and clarity.
• The RXD (Rapid eXtra-silent stepping Drive) autofocus engine delivers impressively quiet, fast and smooth focusing performance to suit both still images and video applications. This focusing system also offers a minimum focusing distance of just 7.5" and a maximum magnification of 1:3.1 for working with foreground subjects. It is also possible to override full-time manual focus, and supports SONY direct manual focus or tuned manual control function.
• A moisture-resistant construction benefits the use of this lens in inclement conditions, and a fluorine coating has also been applied to the front lens element to protect against dust, dirt and stains.
• The rounded seven-leaf diaphragm contributes to a pleasant quality of bokeh.
• The zoom lock switch keeps the lens in its retracted position when not in use.