Dji Video Receiver

Dji Video Receiver | Video receiver Dji

Receive high-definition video more than 3 miles (line of sight) away from your DJI video transmitter with this wireless video receiver from DJI . The receiver pairs with a separately available transmitter and transmits videos up to 1080p60 using high-efficiency O3 Pro transmission technology over 2.4 and 5 GHz Wi-Fi frequencies. The receiver also supports voice calls/intercom between endpoints using the optional USB-C ports and microphones.

The receiver supports automatic frequency hopping to find the strongest signal and works with AES 256 encryption to protect your video from prying eyes. It allows you to simultaneously receive along with other receivers, such as the high-brightness remote monitor, and the separately available transmitter can transmit to an unlimited number of receivers in streaming mode with slightly lower performance. The receiver can be powered via an optional L-series battery, an optional WB37 battery, or its DC power input.

Long-distance high-definition live streaming

The DJI Transmission receiver incorporates O3 Pro video transmission technology, which offers an incredible ground transmission distance of 20,000 feet. It also supports 1080p60 streaming with a maximum bitrate of 50 Mb/s, as well as live audio monitoring at 16-bit 48 kHz, giving teams on large sets a great remote audio and visual monitoring experience.

Voice call function

After pairing with the video transmitter DJI in control mode, set the USB-C function on both the transmitter and receiver to Voice Call. Connect headphones with built-in microphone to the USB-C ports on the transmitter and receiver to enable voice calls.

End-to-end ultra-low latency

The video receiver uses the same chip solution as the Ronin 4D, with each link explicitly optimized to deliver ultra-low end-to-end transmission latency when paired with cinema cameras like the ARRI ALEXA Mini LF.

Transmission and output

The DJI video receiver is suitable for use with third-party remote monitors and can output video signals directly through HDMI or SDI ports without additional expansion modules. Compared with DJI's high-brightness remote monitor, DJI 's video receiver now supports metadata transmission and video output at fractional frame rates, meeting the professional cinematic quality requirements of large production teams.

Seamless automatic frequency hopping

O3 Pro adds a DFS band to the traditional 2.4 and 5.8 GHz, offering up to 23 channel options that give professional teams more compatible and interference-free transmission channels.

DJI Transmission supports tri-band automatic frequency hopping, which automatically scans the electromagnetic environment for the best wireless channel.

With a built-in frequency sweep, users can even manually select a channel to avoid interference between devices.

By mounting high-gain antennas, the transmission capacity is further increased.

A transmitter with multiple receivers for coordinated shooting

Two transmission modes are available.

In control mode, DJI Transmission delivers optimal transmission performance. Monitoring can be done from two receivers at the same time, while the Ronin 2 and RS 3 Pro's stabilizer and camera can be controlled remotely.

Broadcast mode can be enabled in addition to control mode to enable an unlimited number of receivers (transmission performance differs from control mode).

On larger, more dynamic models, DJI Transmission can work with 20 or more transmitters sending signals to 20 or more devices, resulting in a smooth, coordinated experience that is difficult to obtain with traditional broadcast setups.

Encrypted transmission

DJI Transmission supports linking and AES 256-bit encryption to prevent leakage of sensitive information. Together with the chip and transmission protocol developed by DJI, DJI Transmission can ensure the safety of your footage.

DJI Transmission evolves from DJI 's well-established video transmission technology to offer an end-to-end solution that combines video receiver, monitor, controller and recorder. It is designed for native integration with Ronin Series products and DJI Master Wheels, to transform the industry through an innovative streaming experience that enables vision without limits.

Long distance live HD signal

It features O3 Pro video transmission technology, which offers an incredible 6km[1] transmission distance in 1080p/60fps.

Unlimited number of receivers 

Broadcast mode supports an unlimited number of receivers, which is very convenient for real-time monitoring by multiple devices and increases efficiency.

Tri-band frequency hopping

It supports tri-band automatic frequency hopping, between 2.4GHz, 5.8GHz and DFS.

End-to-end ultra-low latency

It uses the same chip solution as the Ronin 4D, with all parts optimized to provide ultra-low end-to-end latency.

Built-in wireless receiver

The high-brightness remote monitor DJI integrates monitor and receiver, with add-on functions and assistive tools, for precise control.

Stabilizer/Focus/Camera Remote Control

When used with the Ronin 4D grips or DJI Master Wheels,[5] the Ronin 2, RS 3 Pro, focus and camera functions can be controlled remotely. 

Independent recording and playback

H.264 videos in 1080p/60fps can be recorded and stored on a microSD card independently, making it easy to edit evidence directly on set.