Dji Inspire 2 RAW

DJI Inspire 2 Raw

The Inspire 2 takes everything that's good about the Inspire 1 and makes it better. A new image processing system enables up to 5.2K in CinemaDNG RAW,

Apple ProRes and much more. It goes from 0 to 80 km/h in just 4 seconds and reaches a top speed of 108 km/h, has a maximum descent speed of 9m/s. A dual battery system extends flight time to a maximum of 27 minutes (with an X4S),

While the self-heating technology allows it to fly even at low temperatures. FlightAutonomy has been reviewed and developed specifically for the Inspire 2,

Providing two-way obstacle avoidance and sensor redundancy. The increased intelligence adds multiple intelligent flight modes, including Spotlight Pro, which allows pilots the ability to create complex and dramatic shots.

An upgraded video transmission system is now capable of dual-frequency and dual-channel video streaming, in addition to streaming video from

An on-board FPV camera and the main camera simultaneously, for better collaboration with the pilot and camera.

PROFESSIONAL IMAGE QUALITY

Integrated into the Inspire 2 is the new CineCore 2.0 image processing system, capable of recording 5.2K video in CinemaDNG*1, Apple ProRes*2 and more. CineCore 2.0 is built into the front of the plane and works with any camera connected via the dedicated gimbal port.

(Currently compatible with X4S*3 and X5S.)

DETECT AND AVOID

Forward and downward vision systems allow the Inspire 2 to detect obstacles up to 30 meters in advance, allowing for protected flight of up to 54km/h at a controllable attitude angle of 25°. Upward-facing infrared sensors scan obstacles from 15m upwards, adding protection when flying in enclosed spaces. Obstacle detection systems are active during normal flight, RTH and all intelligent flight modes. These sensors are basic components of the DJI FlightAutonomy system

VIDEO TRANSMISSION SYSTEM

The latest upgrade of Lightbridge' DJI technology has an effective transmission distance of up to 7km and is capable of offering both 1080p/720p video and FPV view to the pilot and camera operator. Users can also switch between 2.4GHz and 5.8GHz** control frequencies to cut noise for greater signal stability.

INCREASED RELIABILITY

Reliability has been further enhanced by dual redundancy of key modules such as the IMU and barometer. The intelligent flight control system monitors the redundancy system, giving you accurate flight data.

The new obstacle detection system helps the Inspire 2 detect and avoid obstacles, minimizing the risk of collision.

Dual batteries mean that if a problem occurs in one battery, the other is able to continue the flight quite long enough for a safe landing. At the same time, the Inspire 2 propulsion system is powered by a PWM signal with serial port signal redundancy so that if PWM signals are lost, transmission will continue through the serial port.

This propulsion system has been tested for thousands of hours to ensure reliability, when combined with key sensors and a dual battery design, overall flight reliability has been significantly improved.