Dji Inspire 3

DJI Inspire 3 Drone

Inspire 3 is a professional camera drone that adopts a new fluid design that fully considers aerodynamics to reduce air resistance.

The maximum dive speed has been increased from 9 m/s of the Inspire 2 to 10 m/s, while the vertical ascent/descent speed has been increased from 6 m/s and 4 m/s to 8 m/s. [1]

Powerful maneuverability provides precise, responsive control and an extended flight time of up to 28 minutes. [2]

The FPV camera, visual sensors, positioning antennas, and storage card slot adopt designs that blend seamlessly into the fuselage for a minimalist look and modern industrial aesthetic.

Inheriting the classic transformable configuration of the Inspire series, the Inspire 3 uses an all-new design that supports 360° Pan and Tilt Boost structures. When the landing gear is lowered, the gimbal supports unobstructed 80° up-angle shooting,[3] allowing cinematographers to capture strikingly innovative shots.

From the exterior design to the internal structure, every detail of the Inspire 3 was carefully considered and optimized.

• High mobility precision flight system

Centimeter-level RTK positioning

Inspire 3 integrates high-precision RTK positioning technology used in industries such as architecture and surveying to deliver centimeter-level accuracy. [4] Compared to traditional meter-level positioning supported by global navigation satellite systems (GNSS), RTK not only makes flying more stable, but also makes flight path planning more accurate, significantly improving creative efficiency.

The RTK antennas have been integrated into the airframe with a new stacked ceramic design, which allows for three types of GNSS (GPS, BeiDou and Galileo) and offers dual-frequency positioning down to the centimeter level. By activating an RTK network [5] or setting up a D-RTK 2 mobile station,[6] users can achieve high-precision positioning without mounting any additional modules.

Learn more about RTK Network and RTK Base Station

Custom RTK Network

Use the custom RTK network directly in areas covered by RTK. Simply enable internet access on DJI RC Plus and connect to an NTRIP server to allow the Inspire 3 to receive complete data for fast and accurate positioning.

RTK Base Station

In environments without RTK network coverage, the RTK function can be used by configuring a D-RTK 2 mobile station. The Inspire 3 can then receive complete data from the mobile station for precise positioning.

• Dual antenna orientation

Both the front and rear of the Inspire 3 have an integrated stacked ceramic antenna, which provides powerful anti-magnetic interference capability to further enhance flight accuracy and safety.

• Waypoint Pro

Designed especially for aerial cinematography, Waypoint Pro allows for flight path planning and shots with a wide range of custom settings. With new repeatable routes and 3D Dolly modes, an innovative automated shooting experience can be easily achieved. In addition, RTK positioning at the centimeter level ensures more accurate flight path planning and execution. Whether shooting alone or on a professional rig, use Waypoint Pro to master even the most complex scenes.

• Repeatable routes

Using repeatable routes, the aircraft will automatically fly on the same route and maintain all preset parameters, such as altitude, speed, gimbal angle, and camera settings. Repeating the same flight mission allows cinematographers to effortlessly take difficult one-off shots or fly at different times in the same place to easily create long-lasting time-lapses that capture transitions such as day to night or season to season.

• Dolly 3D

3D Dolly can simulate a crane, cable camera, or dolly on movie sets and goes far beyond the limitations of those devices.

After planning a flight path, the cinematographer can manually control the aircraft to move along the route from side to side while adjusting parameters such as speed, gimbal angle, and more depending on the needs of the shot. This makes complicated cinema-quality camera movements easier and more efficient and can deliver enhanced visual effects.

• Professional light

Updated from Inspire 2, Spotlight Pro allows solo creators more shooting possibilities. Based on powerful machine learning algorithms, Inspire 3 supports automatic subject recognition and locking of people, vehicles, and vessels more accurately than its predecessor.

When using Spotlight Pro's tracking mode, the aircraft and gimbal camera are oriented in the same direction and remain fixed on the subject so that the pilot can get circular shots without manual framing adjustments.

1. Tracking Mode
2. Free Mode

In Free mode, thanks to the Inspire 3's 360° gimbal panning, the gimbal camera can remain locked on a subject, while a pilot only uses the FPV camera to check their surroundings and control the flight path more responsively to achieve complex camera movements more easily.

• Omnidirectional detection system

Inspire 3 is equipped with nine visual sensors, enabling a robust omnidirectional sensing system that can detect obstacles in all directions and provide comprehensive protection for flying. [7]

For the first time, a fisheye camera has been added to each of the four landing arms. This design helps prevent fuselage obstruction when the landing gear is raised and allows for horizontal obstacle detection when the landing gear is lowered.

1. 360° horizontal visual sensors
2. Visual upward sensors
3. Visual Downward Sensors
4. ToF Down Sensor

• Customizable obstacle detection

In addition, Inspire 3 introduces a new customizable feature to help ensure greater flight safety and greater creative freedom. Horizontal, up, and down obstacle detection can be enabled or disabled independently, and an obstacle alert range can be manually configured to suit different scenarios. [8]

When active avoidance is disabled, users can still see the distance from an obstacle on the real-time navigation screen and receive an audio alert when an obstacle is within a set range without the aircraft performing an automatic avoidance movement. This opens up new possibilities for professional aerial crews who want to achieve a more complex camera language.

• Ultra-wide night vision FPV camera

Inspire 3 is equipped with a new 1/1.8-inch sensor FPV camera with a pixel size of 3μm, an ultra-wide 161° DFOV, and the ability to stream live streams up to 1080p/60fps. Compared to its predecessor, the DFOV is roughly doubled. This FPV camera offers more impressive light detection capability, allowing pilots to observe their surroundings vividly and clearly, even at night, and ensure higher levels of flight safety.

• Full-frame 8K imaging system

Bespoke 8K sensor

DJI's lightest full-frame three-axis gimbal camera, the X9-8K Air, is tailor-made for the Inspire 3 to take drone cinematography to the next level. It features DJI's latest image processing system, CineCore 3.0, which supports internal CinemaDNG video recording up to 8K/25fps[9], as well as Apple ProRes RAW 8K/75fps[10][9] video that meets the needs of world-class movies. and television productions.

Internal ProRes RAW recording up to

8K/75fps

CinemaDNG internal recording up to

 8K/25fps

8K means ultra-high-resolution aerial imagery that retains a true-to-life texture close to what the human eye sees, with a clarity that surprises audiences when displayed on larger screens. RAW brings the X9-8K Air's sensor into play, providing plenty of space for visual effects and color grading.

In S&Q mode, the X9-8K Air supports internal recording of up to 4K/120fps full-frame ProRes RAW video without cropping, providing more creative editing options.

• Dual native ISO

X9-8K Air supports dual native ISO. At 30 fps full-frame and below, it offers EI 800/4000, which supports the 24 fps commonly seen in film productions and the 25 fps used in commercial and television productions. At over 30 fps, EI 320/1600 is available.

This allows the X9-8K Air to shoot images with exquisite detail and minimal noise, even cityscapes or beaches in low light, putting it on par with professional terrestrial cinema cameras.

• More than 14 stops of dynamic range

X9-8K Air covers more than 14 stops of dynamic range, capturing rich detail of highlights and shadows in complex lighting scenarios such as sunrises and sunsets. The high dynamic range provides more possibilities for post-editing, preserving genuine colors even after important exposure definitions.

EI grayscale (30 fps and below)

EI grayscale (over 30 fps)

• DL Mount Lenses [11]

Inheriting DJI's proprietary DL mount, the X9-8K Air is compatible with an additional 18mm F2.8 full-frame ultra-wide lens and a new telephoto lens (to be released at a later date)[12] in addition to the previous full-lens DL 24/35/50mm F2.8 mount lens picks. All five lenses are custom-made for aerial cinematography. The housings are made of lightweight monocoque carbon fiber, so the lightest lens weighs just 178g, which meets the Inspire 3's ultra-high maneuverability requirement.

Learn more about the new DL 18mm F2.8 lens

The new DL 18mm F2.8 ASPH full-frame lens is specially designed for 8K aerial cinematography. With a 100° full-frame DFOV, the 18mm focal length can include more information, making it very useful for capturing the grandeur of larger subjects such as mountains and architecture. In addition, when approaching a subject up close, the ultra-wide angle can introduce additional visual strain. Its high sharpness and well-controlled chromatic aberration also allow the lens to record 8K images with richer details and true-to-life colors.

• DJI Cinema Color System (DCCS)

Based on DJI's mature color science and technology, the DJI Cinema Color System allows the X9-8K Air to retain authentic colors that redefine the look of aerial cinematography. This applies to natural environments and cityscapes, and also accurately captures skin tones in different environments and lighting conditions. DCCS ensures effortless color matching between the X9-8K Air and terrestrial cinema cameras like DJI Ronin 4D, delivering consistent color styling from air to ground to meet the needs of film production publishing workflows.

• Multi-camera timecode synchronization

Through the aircraft's 3.5mm port, you can synchronize the timecode between equipment in the air and on the ground. When it comes to abundant images from multiple cameras, the light from the timecode makes the editing process significantly simpler and more efficient.

• Pro Video Streaming & Control System

DJI RCPlus

Inspire 3 comes with a professional-grade remote controller, the DJI RC Plus, which has a built-in 7-inch 1200 nit high-brightness display to provide an extraordinary outdoor monitoring experience. It also features an HDMI output port, along with several buttons and dials on the front, back, and top, which allow for quick and intuitive operation. The button functions can also be customized to suit users' habits and offer a smoother trading experience.

The built-in RC Plus battery provides a runtime of approximately 3.3 hours and extends to 6 hours with a WB37 power bank. [11] It also supports hot-swapping the battery to enhance creative efficiency.

In addition to the classic flight control interface, the new DJI Pilot 2 app for Inspire adds a cinema-quality monitoring interface, which allows information such as camera exposure, video specifications, focal length, and gimbal angle to be checked in a simple and convenient way, easily meeting the monitoring requirements of gimbal and DP operators.

Professional accessories such as a strap and waist support are also included for more comfortable and efficient prolonged use.

• Cinema-quality O3 Pro video streaming [13]

Inspire 3 is equipped with O3 Pro, DJI's latest cinema-quality video transmission system, which allows a maximum transmission distance of 15 km in single-control mode[14] and 12 km[15] in dual-control mode. Both the gimbal camera and FPV camera support 1080p/60fps live streaming and an ultra-low latency of 90 ms. [16] Compared to the Inspire 2's Lightbridge video transmission system, O3 Pro has made a generational leap in transmission distance, latency, and overall stability.

For the first time, 4K/30fps live streams also support a maximum transmission distance of 5km to meet the needs of UHD monitoring and live streaming on set. [17]

• Independent links for dual control [18]

Compared to its predecessor, the Inspire 3's dual-control experience has been significantly improved. Two remotes can receive live feeds and control the drone independently, so the gimbal pilot and operator can be in different positions on set. This breaks the limitations of Inspire 2 of linking the primary and secondary control links.

If the pilot loses signal from the aircraft, the gimbal operator can now take control of the aircraft to return home safely or land directly.