New stabilizer Ronin-MX, can carry mounted two batteries, one of them feeds the stabilizer itself and is repositioned on the front of the stabilizer, second battery is located on the back and powers the camera and accessories, so that it can be removed if you want.
Compatible with many of the cameras on the market from manufacturers such as CANON, PANASONIC, SONY or NIKON, weighing up to 4.5 kgs.
The batteries of the Ronin-MX allow an autonomy of about three hours, with LED charge indicator remaining.
The Ronin-MX is suitable for cinema cameras, DSLR mirrorless cameras, and a weight of up to 10.
Transmitter for remote control of rotation and inclination. Balance adjustment system without tools. Bluetooth wireless interface for configuration.
THE PORTABLE 3-AXIS STABILIZATION BALL JOINT SYSTEM
Developed for film professionals, the Ronin DJI represents a generational leap in camera stabilization technology. Its custom-made sensors, powerful motors and advanced algorithms put top-notch precision in your hands.
SAVE TIME DURING FILMING
Once your camera is set, the Ronin can be ready to shoot in 5 minutes, saving a lot of time and increasing efficiency during filming. Integrated ATS (Stabilization AutoFit) technology intelligently balances the Ronin to the base of your camera at the touch of a button.
In the Ronin it transforms horizontal and vertical turns into smooth angle changes, stabilized at all times.
3 RECORDING MODES
The 3 recording modes allow you to use the Ronin in different scenarios, being able to alter between one and the other without changing the settings of the Assistant application of the Ronin or in a second remote operator. SmoothTrack functionality is available in all three modes.
- PORTRAIT MODE
Rotate the stabilization ball joint by bringing the camera closer to eye level to get a higher perspective without making the effort to lift it. Use this Mode when recording from the roof of a car or over a crowd.
- PORTRAIT MODE
- SLEEP MODE
The default mode of the stabilization ball joint is Suspended Mode. You can keep the camera comfortably close to the ground, at chest level, or anywhere in between. This mode is also the one used when the Ronin is suspended from an arm or crane.
- SLEEP MODE
- SUITCASE MODE
When a narrower stabilizer is needed, for example while crossing doors or narrow paths, the Suitcase mode is ideal. It allows you to carry the stabilization ball joint on one side next to your leg, much like a suitcase.
EXTREMELY DURABLE, HIGH QUALITY CONSTRUCTION
Made of aeronautical-grade precision aluminum, the Ronin has a durability that allows it to withstand wear and continuous use in the toughest runs and offers high reliability. With no loose wires or clamping bands, it looks clean and professional.
BLUETOOTH ASSISTANT MOBILE APP
The DJI Assistant mobile app offers a wide variety of features and allows easy configuration of the entire Ronin system. The PC or MAC application DJI Assistant also allows you to control all the functions of the Ronin as well as being open to new future functions thanks to firmware updates.
EASY SETUP IN 5 MINUTES
With a little practice, in less than 5 minutes you can set up and stabilize the Ronin every time you change the camera settings. This saves time by making the Ronin more efficient in professional situations where every second counts. Integrated ATS (Stabilization AutoFit) technology intelligently balances the Ronin to the base of your camera at the touch of a button.
COMPATIBLE WITH A WIDE RANGE OF CAMERAS AND LENSES
The Ronin is not designed for a specific camera. It can be easily adapted and transported from small and lightweight cameras such as the Micro 4/3 to heavier ones such as the Red Epic.
BASED ON ZENMUSE TECHNOLOGY
Zenmuse' DJI stabilization ball joints were the first available in the world that used brushless motor technology for professional recording and aerial photography. The Zenmuse ball joint line has long been the reference to which all the others were compared. The Ronin is based on the same technology and also offers several control modes, an integrated IMU and customizable brushless motor control.
CONTROL KNOB FOR A SECOND OPERATOR
It includes a remote for a second operator that allows you to rotate the camera horizontally, vertically and rotate it regardless of the movement of the Ronin. SmoothTrack speed and operating modes can be controlled from the two customizable levers located on the controller.
HIGH-PERFORMANCE PROCESSOR POWER
A specific and advanced 32-bit floating-point processor offers higher efficiency than an ARM processor, for faster processing of signals from onboard encoders.
HIGH TORQUE, PRECISION CONTROLLED MOTORS
The engines have been developed with high performance in mind. Using FOC control, you can enjoy high accuracy, low vibration and increased torque. Digital Absolute Positioning Encoders on each axis offer the highest level of accuracy. This combination of engine modules and features is unique in its field.
INTEGRATED RECEIVER & REMOTE CONTROL
An integrated DJI receiver allows the Ronin to be controlled remotely by a second operator. The stabilizer operator can focus on the movement of the stabilization ball joint while the second operator pays attention to the movement of the camera. The use of a second operator is also useful for controlling the stabilizer when working with aerial platforms for cinema. It also includes a D-Bus port for receivers of other brands.
RAPID DISASSEMBLY OF THE UPPER ARMS
The upper arms have a rapid disassembly system that allows and disassembly to be able to maneuver it quickly and without complications. The same mounting system allows it to be connected to a vehicle or a multirotor mount.
EASILY INTERCHANGEABLE SMART BATTERY
More than 6 Hours
Easily mount accessories including a video monitor, 3rd party video transmitters and more on the top bar accessory mounts.
PROTECTIVE CARRYING CASE
Its extremely strong, durable and waterproof case with wheels allows it to be carried comfortably. A layer of dense custom-made PPE foam protects the Ronin and its accessories.