Kenko Z Nikon Extension Tube

Z- KENKO NIKON Extension Tube

Simply by pairing it between the camera body and the lens, KENKO Extension Tubes can conveniently turn a regular lens into a macro lens, allowing photos to be taken closer to the subject than the shorter shooting distance allowed by the lens.

Composed of two rings of 10 mm and 16 mm respectively, which can be used both singularly and combined, this set of extension tubes KENKO for NIKON Z-mount is compatible with the NIKON Z7 and Z6 systems (Z mount).

Precautions:

• Extension tubes are not intended for use in combination with mounting adapters or teleconverters. Doing so can damage the camera and lens.
• Each ring of the set is equipped with electrical contacts, to connect with the camera and the lens body.
• AF operations are possible, but, as the depth of focus is shortened, it is recommended to switch to manual focus.
• Use the ring whose width does not exceed the focal length of the lens used. If the width of the ring exceeds the focal length of the lens used, it will be impossible to focus on the object.
• Due to the extremely shallow depth of field, it is recommended to use manual focus.

Specs

• Category -> Extension Tubes
• Model -> KENKO DG Set Extension Tube for NIKON Z
• Mount -> NIKON Z
• Main features
• Sensor size -> supported Full Frame
• TTL Meter -> Yes
• Fully automatic diaphragm coupling ->
• Tube length -> 10mm, 16mm
• Additional information
• Weight -> g78g, 101g