Leofoto Gimbal PG-1 ball joint.

Gimbal kneecap Leofoto PG 1

Travel lightweight with the 2.2 lb. PG-1 black Gimbal Leofoto head, made of T6061 aluminum. Together with its lightweight tripod, this allows you to travel longer distances with its setup comfortably. The gimbal head allows you to capture fast-moving subjects with a large, heavy telephoto lens that you otherwise couldn't do just by holding the lens in your hand.

The head arm swings back and forth and can be locked at the required angle, and the camera platform, which is compatible with the Ark type, has a 3.9" height adjustment capability to help balance a telephoto lens on the head. Future settings can be repeated due to the scale printed on the side of the swing arm. In addition, on the side of the arm there are 1/4"-20 bushings for accessories such as an articulated arm. The 9.7" tall head can easily hold up to 55.1 lbs of equipment and rotate 360° while keeping the horizon straight using the bubble level at the base of the head.

Base with removable plate type Arca Swiss of 10 cm in length included with worm locking screw.

PG-1 Leofoto gimbal ball joint specifications

• Model: PG-1
• Brand: Leofoto
• It has a base diameter of 60 mm
• Panning motion with laser engraving indications.
• A length of 200mm
• It has a height of 245 mm
• 76 mm width
• Base with 3/8 input
• It has 4 inputs for screw of 1/4 in the vertical arm.
• Weight 1 Kg
• Maximum support capacity up to 25 Kg

Included in the box:

• Gimbal ball joint Leofoto PG-1
• Swiss ark plate model PU-100D of 100 mm in length with screw 1/4 and another of 3/8
• An Allen Key
• Adapter screw 1/4 to 3/8